HomeContact Us View CartView AccountShipping Information
Swimming Pool and Marine Paint
Email UsContact UsLike Us on Facebook
 Pool Painting Tips
 

   Swimming Pool Paint


   Pool Deck Paint


   Marine Paint


   Wood Finishes


   Metal Paint & Primers


   Swimming Pool Tile


   Interior Paint


   Preparation & Cleanup



Product Details

 
Tie-Kote Water Based Epoxy Primer/Sealer Gallon Kit
SKU: 72000-K
List Price: $111.65
Your Price: $89.95
Your Savings: $21.70

Quantity:

Overview

Tie-Kote Water Based Epoxy Primer/Sealer Gallon Kit

Tie-Kote Primer is a universal tie-coat/sealer for many pool and industrial maintenance applications. It allows for easy conversion from conventional finishes to 2-part solvent based epoxy finishes. Features excellent water and chemical resistence and cleans up with water.

Tie-Kote is a two component water based epoxy tie-coat/sealer with excellent adhesive properties over existing one and two part finishes. Primarily used on cleaned exisiting finishes which will be over coated with a two component solvent based finish which may attack the existing finish and cause a loss of adhesion. Can be used over chlorinated polymer pool paints, conventional solvent based and water based finishes such as alkyds, vinyls, acrylics and latex. Ideally applied by roller or brush but can be sprayed if desired.

  • Color: Clear Amber Matte
  • Coverage: Approximately 200 square feet per gallon at 2.5 mils DFT
  • Pot Life: 2-3 hours
  • Shelf Life: 24 months
  • Average Dry Time: Dries to touch in about 1 hour at 70-75 deg F. Can be top coated with solvent based epoxy finishes after an overnight cure.
  • Recommended Reducer/Clean up: None recommended. Use tap water if necessary.
  • Surface Preparation: Surface must always be clean, dry and properly prepared prior to painting. Failure to do so will lead to eventually blistering and/or peeling. High pressure fresh water clean if possible or solvent clean to remove all surface contaminants. Allow to thoroughly dry prior to over coating.
  • General Application: For use as a tie-coat/selaer over existing finishes that are desired to now be painted with solvent based epoxies. Apply by roller or brush. Add up to 10-15% by volume of tap water but only if necessary. Apply one or two coats if needed to meet dry film thickness requirements. Allow 15-20 minutes induction time after the curing agent component is added.
  • Mixing and Thinning: Shake or mix each component thoroughly. Add the curing agent component to the base component and stir thoroughly. Continue to stir while using.
  • Existing Painted Surfaces: First ensure the existing surace is compatible with a two component water based product.
  • This product is a two-component paint. Both components must be mixed together before application.

Reviews

Add Your Review
Currently there are no reviews for this product. Share your opinion with others, be the first to write a review.
Add Your Review

Tell a Friend

Your Name:
Your Email:
Friends Name:
Friends Email:
Subject:
Message:
Verification:
 

Your cart is currently empty
Subtotal: $0.00

National Pool Paint Ramuc Pool Paint Blue Water Marine Boat Paint Top Secret Coatings - Swimming Pool Paint, Marine Paint, Industrial Paint

Click here to find out what swimming pool paint you should use on your swimming pool or painting project. Free Shipping on Paint orders over $299 - click here for details. Swimming Pool Paint Bulk Pricing/Paint Volume Pricing Do it yourself fiberglass swimming pool tile kits garage floor painting kits Pool Preparation and Cleanup Supplies

Armada Wood Finishes and Polyurethanes Garco Clear Wood Finishes